Crystallume
Founded in 1984, Crystallume pioneered the development and application of Chemical Vapor Deposition (CVD) diamond technology. Since then, Crystallume’s coating experts have become specialists at solving customer problems with diamond technology.
|
|
Pure Diamond – Grown from Methane Gas
The DCC® (Diamond Coated Carbide) technology developed by Crystallume in 1992 produces continuous diamond coating with all the extreme chemical and physical properties of natural and high-pressure high temperature (HPHT) synthetic diamond. It is essentially pure diamond that is grown from methane gas. This diamond coating of inter-grown diamond microcrystallites with no binder is deposited by proprietary chemical vapor depository technology. It is superior to other alternative coatings like DLC, PCD and Plated Diamond.
The DCC® (Diamond Coated Carbide) technology developed by Crystallume in 1992 produces continuous diamond coating with all the extreme chemical and physical properties of natural and high-pressure high temperature (HPHT) synthetic diamond. It is essentially pure diamond that is grown from methane gas. This diamond coating of inter-grown diamond microcrystallites with no binder is deposited by proprietary chemical vapor depository technology. It is superior to other alternative coatings like DLC, PCD and Plated Diamond.
Featured NEW Products
|
Diamond Coated Threadmills
Crystallume has added single profile diamond coated thread mills to our offering. We will be stocking sizes from #3 (2mm) to 1⁄2” (16mm) for UNC and UNF threads. These single profile diamond coated thread mills will allow the manufacture of ID and OD precision threads in difficult to machine highly abrasive non-ferrous materials. The single profile design creates minimum pressure during the machining operation on small or delicate parts. The same thread mill can cut right, left, or multi-lead threads with just a change in programing on the machine. |
|
|
Heat Shrink Tool Holder Extension
Crystallume now supplies the missing link in using our REPLACEABLE TIP END MILLS. A specially designed heat shrink extension with a 4.00” reach to allow deep milling. Part Number: USE-250-1 Description: 5/8”O.D. X 1/4”I.D. X 6.30”LENGTH UNIVERSAL SHRINKFIT EXTENSION NECKED TO A 4” REACH FOR A 1/2” O.D. TOOL Tool Holder: 0.625 OD x 0.250 ID x 6.30 OAL 4.0 x 0.472 diameter reach |
|
