Diebold
As early as 1999, Helmut Diebold GmbH & Co introduced the first contact shrink unit, a real milestone in modern shrink technology. In the following years inductive shrink units were developed on this basis. Today, Diebold is the technological world market leader and offers more than 10 different heat shrink units.
If you have not seen it you need to check out the patented FKS water cooler for the rapid cooling of the tools after the shrinking process below!
|
|
Featured Products
Accutek is the exclusive distributor of Helmut Diebold GmbH & Co. products in North America. This includes the full range of world leading shrink fit machines with the optional patented Pyrometer. Also included are the various JetSleeve Shrink Fit holders and the TER Shrink Collets.
Diebold Shrink Fit
|
OneTouch
OneTouch is a new operating mode in the touch display in conjunction with TempControl (Pyrometer Control). In addition to the basic function, this has additional features:
|
|
DIEBOLD MICROSHRINK MS 3.0
For the gentle shrinking of thin-walled chucks (TSF ThermoSlimFit and TUS ThermoUltraSlim), the MS 3.0 micro shrink unit was developed. The generator has an output of 3 kW, ideally matched for a gentle shrinking process of thin-walled chucks. Intelligent pulsing of the power effectively controls the shrinking process while always protecting the tool against overheating. Suitable parameter sets are stored in the unit for different chuck contours.To cool the heated tool holders, a new type of air cooler or the liquid cooler FKS 04S are available as additional devices.
|
|
SHRINK UNIT US 1100 TUBECHILLER™
SHRINK UNIT US 1100 TUBECHILLER™ WITH INTEGRATED WATERCOOLER
Shrink Unit US 1100 TubeChiller™
For innovative shrinking and automatic cooling of shrink fit tool holders we offer our newest technology called „TubeChiller™“. This technology was developed to combine our shrink unit series US 1100 with automatic cooling. The units work fully automatic and after the shrink fit process, tool holders are cooled down automatically so that it is impossible for operators to touch hot tools.
After the shrink process the tube of the chiller unit lifts automatically from the base. At the same time the tube is filled with coolant and it cools down the hot tool holder. While the tube is moving up, it moves the coil back in to the start position without the need of pneumatic or and mechanical accessories.
For innovative shrinking and automatic cooling of shrink fit tool holders we offer our newest technology called „TubeChiller™“. This technology was developed to combine our shrink unit series US 1100 with automatic cooling. The units work fully automatic and after the shrink fit process, tool holders are cooled down automatically so that it is impossible for operators to touch hot tools.
After the shrink process the tube of the chiller unit lifts automatically from the base. At the same time the tube is filled with coolant and it cools down the hot tool holder. While the tube is moving up, it moves the coil back in to the start position without the need of pneumatic or and mechanical accessories.
The new Pyrometer Technology
The Pyrometer technology was developed for an easy shrink fit process where minimal temperature will be applied to the tool holder that is necessary to make the shrink process work. This prevents overheating of the tool holders, a well know problem in shrink fit technology. Uncontrolled energy input and high power of the shrink fit machine is not the right solution, only controlled temperature guarantees a smooth shrink fit process.
